Braun stahl pipe tec – Compensators

Standardized and specialized designs are available, following some features:

  • for the installation into steel pipelines in stainless steel or carbon steel
  • installation in temperature-related length changes of pipes, for ground settlement zones
  • maintenance-free with self-greasing, self-sealing
  • with weld ends, or with flanged ends
  • design for axial compensation of + / – 500 mm
  • Designs available for pressure ratings up to PN 200 barg
  • Designs available for Diameters up to DN 56″ (1400 mm)
  • Designs available for temperatures from -50°C up to 200°C
  • sensors or dimensional control equipment available
  • Design and selection of materials for services: gas, potable water, sewage waters, salt water, oil, sour gas, kerosine, petrol, propane, butane, ethylene, and more
  • Steel materials acc. to EN, ASTM, API, ASME and other international standards with inspection certification acc. to EN10204-3.1 or EN10204-3.2.
  • Inspection and tests of the compensators can be done following to Pressure Equipment directive PED 97/23, TRFL (german technical rules for transmission pipelines), EN1594, DIN 2470 Teil1, ASME Code, API, ASTM, NEN 3650-2:2012 (Eisen voor buisleidingsystemen), AD2000 (German pressure vessel code) and other international standards and as per requirements of the project.

Tests and Inspections available such as Hydrostatic pressure tests, Pneumatic tightness tests, RT, UT, DPT, all non-destructive and destructive tests of welds and steel materials, thermal and hydraulic cycles, and others on request.

Dehner – Axiale Kompensatoren

Standard- und Sonder-Designs sind erhältlich, hier einige Möglichkeiten:

  • für den Einbau in Stahlrohrleitungen – Edelstahl oder schwarzer Stahl,
  • für Senkungsgebiete, für Erdbebengebiete und für thermisch bedingte Längenänderungen in Rohrleitungen
  • mit Anschweissenden, oder mit Flanschanschluss
  • Design für axiale Kompensation von + / – 500 mm möglich
  • als selbstdichtender, als axial sich selbst zusammenschiebbare Konstruktion erhältlich, mit Längenbegrenzung, mit Auszugssicherung, mit Selbstschmierung
  • Ausstattung möglich mit Meßeinrichtung/Sensor
  • erhältlich für Druckstufen bis PN 200 bar
  • Ausführungen für Nennweiten/Durchmesser bis 1400 mm DN 56″
  • für Temperaturbereiche von -50°C bis 200°C möglich
  • Design und Materialauswahl für Medien wie: Gas, Trink-und Abwasser, Salzwasser, Öl, Sauergas, Kerosin, Benzin, Erdgas, Propan, Butan, Äthylen, und andere
  • Stahlwerkstoffe nach EN, ASTM, API, ASME und internationalen Normen mit Abnahmeprüfzeugnissen nach EN10204-3.1 oder EN10204-3.2.
  • Abnahme und Prüfungen der Dehner möglich nach Druckgeräterichtlinie EG-Richtlinie 97/23, TRFL (Technische Regeln für Rohrfernleitungen), EN1594 , DIN 2470 Teil1, ASME Code, API, ASTM, NEN 3650-2:2012 (Eisen voor buisleidingsystemen), AD2000 und anderen internationalen Normen und Kundenspezifikationen.

Mögliche Prüfungen: Wasserdruckprüfung, Luftdruckprüfung, Röntgenprüfung , Ultraschallprüfung, Farbeindringprüfung, Positive Material-Identifikationsprüfung, alle zerstörenden Schweißnahtprüfungen, Härteprüfungen, und andere auf Anfrage.

Compensateurs – Manchons à compensation axiale

Des réalisations standard et specialisées sont disponibles, selon les caractéristiques:

  • pour une installation dans la tuyauterie en acier ou inox
  • disponible soit avec des bouts à souder, soit avec connection par brides
  • réalisations disponibles jusqu’au pression de PN 200 barg
  • pour installation dans les tuyaux à temperatures variées où la longueur se change , ou dans les zones de tassement
  • diamètres jusqu’à 56″ (1400 mm)
  • compensation axiale de +/-500 mm possible
  • Des réalisations sont disponibles pour des températures de moins 50°C jusqu’à + 200°C.
  • des capteurs et des outils à mesure les longueurs sont disponibles
  • des réalisations et choix de matériaux sont disponibles pour les services:
    gaz, eau potable, eaux résiduaires, eaux salées, pétrole, gaz acide, kérosène, benzène, gaz naturel, propane, butane, éthylène, et autres.
  • types d’aciers selons les normes EN, ASTM, API, ASME et autres standards internationaux avec certification d’inspections selon EN10204-3.1 ou EN10204-3.2.
  • les tests et inspections des compensateurs sont disponible suivants la directive Européenne sur les équipements de pression PED 97/23, TRFL (Règles techniques allemandes pour les pipelines), EN1594, DIN 2470 Teil1, ASME Code, API, ASTM, NEN 3650-2:2012 (Eisen voor buisleidingsystemen), AD2000 (Code allemand sur les récipients à haute pression), et autres, et des specifications du client.

Tests et inspections disponibles:
Tests de pression hydrostatique, tests d’étanchéité pneumatique, Radiographie, Ultrasons, tous les contrôles destructifs et non destructifs, cycles thermiques et hydrauliques, et autres sur demande.